Intel PowerTOP – Not Just For Laptops

When I originally read about PowerTOP from Intel, I figured it was designed completely for laptops. I decided to install it on my desktop with a Core2Duo and see what happens… strangely enough, it worked!

Although there is less data available when using a desktop CPU, it is certainly VERY useful in determining what is using the most power.

After installing PowerTOP using apt-get, I ran sudo powertop -d which collects data for 15 seconds and spits out what is waking up the CPU from idle.

While running Firefox with multiple tabs, a few directories open in Nautilus, and I’m copying several hundred megabytes of files across SSH (to a USB external hard drive), we can see pretty clearly that copying files wakes up the CPU almost as much as running Firefox does.

30.7% (113.7) firefox-bin : schedule_timeout (process_timeout)
22.3% ( 82.5) : uhci_hcd:usb1, libata, eth0, nvidia
18.5% ( 68.6) firefox-bin : futex_wait (hrtimer_wakeup)
9.7% ( 35.8) Xorg : do_setitimer (it_real_fn)
3.5% ( 12.8) compiz.real : schedule_timeout (process_timeout)
3.4% ( 12.5) S20powernowd : queue_delayed_work_on (delayed_work_timer_fn)
2.7% ( 10.1) : ehci_work (ehci_watchdog)
2.2% ( 8.3) : sk_reset_timer (tcp_delack_timer)
1.3% ( 4.9) : ehci_hcd:usb2, uhci_hcd:usb7
1.1% ( 3.9) : usb_hcd_poll_rh_status (rh_timer_func)

What is really, really nice about PowerTOP is the tweaks that it suggests that are specific to your system, to lower power usage. I have a Serial ATA DVD drive. When PowerTOP noticed this, it actually suggested that I perform the following tweak to allow the drive to go into power saving mode more often:

hal-disable-polling –device /dev/scd0

Here’s a screenshot of what it looks like.. notice that you can just press the U key and perform the tweak. No command-line-fu needed here.

screenshot-waynegutsy-desktop-powertop-18-1.png

I could either run the command myself, or just press a key while that suggestion was up to conserve additional power. There were several tweaks that were suggested for my computer, and after doing them, I feel just a little bit better about “doing something for the enviroment.”

Thanks Intel for making me feel like a good person.

  • http://www.linuxscrew.com Artem Nosulchik

    Hi there,

    Nice utility, thanks for your post! :)

  • Qian Wang

    Hi there,

    What about the detailed power consumption value, which should be presented in the first column of the result.
    I tried both laptop and desktop PC, and only laptop can show detailed figure for power consumption (i.e, 4.91W, 56mW)
    So I think this function is only for laptops :(